COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
CoPyRiGhT=(c) Copyright 1990-1994 Novell, Inc. All Rights Reserved.
Description
The description for this error is not available.
Error
Error Report
The program cannot continue.
Severity
The program should continue normally.
The current operation cannot be completed.
The system could not load overlay file %s_RUN.OVL.
The Trace was forced to exit because it could not create a portal.
Program Trace Portal
Please Wait
The system error library file %s is missing.
The error portal cannot be created during program initialization.
The system could not create a new portal because the portal control block table is full.
The system could not allocate additional memory.
The system cannot create a portal with a height of %d and a width of %d because it is too large.
The system could not seek a specific position in file %s.
An End_Of_File error was returned while attempting to read file %s. The read request was for %d bytes.
File %s could not be read. The read request was for %u bytes.
File %s should have had %u bytes read from it.
The system could not push a list onto the stack because the list stack is already full.
The system could not pop a list from the stack because the list stack is empty.
The system cannot display the utility header with the current date and time.
Press <Esc> to continue.
The system could not allocate %u bytes of additional memory.
File %s could not be opened.
File %s could not be closed.
File %s should have had %d bytes written to it.
The system could not write to file %s. The write request was for %u bytes.
The first element of the list could not be obtained because the list is empty.
The last element of the list could not be obtained because the list is empty.
The current list cannot be restored with list buffer number %d because the buffer number is invalid.
The current list cannot be saved because the list save buffer number %d is invalid.
A section of memory could not be freed that was previously allocated.
The bindery is locked. Normally the bindery is only locked if the supervisor is backing up volume SYS:. No information can be obtained until the supervisor unlocks the bindery.
Server %s does not respond.
Server %s is not connected.
Your station is already attached to the maximum number of servers allowed. You must detach from at least one server before you can attach to server %s.
Server %s does not have any free connection slots. Another user must detach from it before you can attach to it.
You are already attached to server %s.
Information about server %s could not be obtained because the server did not supply the information.
Bindery object %s with property value %s could not be obtained from the server bindery.
January
February
March
April
August
September
October
November
December
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
The system could not write the information to bindery object %s property %s.
The system cannot create a bindery property for bindery object %s with property %s.
Property %s of bindery object %s cannot be deleted.
The name of bindery object #%08lx could not be obtained.
The portal information cannot be obtained because no portal is currently selected.
File %s could not be created.
Either the string passed to EditPortalString was longer than the maximum length allowed, or the string was not properly initialized.
Server:
Filename %s could not be converted to a full path specification.
The system could not change the file attributes of file %s. The mode was %d.
Default server:
Warning: This station has no default server.
The procedure EditText failed because the default text was longer than the maximum length allowed.
Cancel All Changes
Save Changes?
The paste buffer is empty.
The text buffer is full.
No insertions are allowed while the Mark key is activated.
The marked block is too big for the available memory.
There are no characters in the marked block.
Filename %s could not be converted to a path specification.
Dynamic message number %d could not be set because no dynamic message pointer for that number exists.
The help file %s is the wrong version.
The name of the server at connection slot %d could not be obtained.
The system could not locate the Help Librarian data file %s and will not be able to provide Help for this utility.
The system could not read the Help Librarian data file %s and will not be able to provide Help for this utility.
The system is using an invalid version of the Help Librarian data file %s and will not be able to provide Help for this utility.
No specific application help is available at this point.
The text is too long to fit in the current portal.
No portal is currently selected to display the text.
There is no preceding Help screen.
This is the last help screen.
The following keys are available while viewing Help:
Press this key to go back to the previous Help screen.
Press this key to go to the next Help screen.
Press this key to view a list of the function key assignments on your machine.
Press this key to exit the Help utility.
No server is attached.
A read error occurred during attempt to read the overlay file %s_RUN.OVL.
The overlay file %s_RUN.OVL is the wrong version for this utility.
The system called GetMessage, but no message was specified.
The system called GetMessage, but the requested system message has been deleted.
Unknown Procedure
The system called GetError, but the specified procedure has been deleted.
Escape
Exit Program
Cancel
Cancel Changes
Backspace
Delete Left
Insert
Delete
Modify
Rename/Modify/Edit Item
Select
Accept
This station does not have rights to create objects in the bindery.
Online Help
Toggle Mark
Cycle
Cycle Screens
Move Up One
Move Down One
Move Left One Space
Right
Move Right One Space
Ctrl+PgUp
Beginning
Ctrl+PgDn
Move Far Left
Move Right One Word
Move Left One Word
Move Far Right
Previous Screen
Next Screen
Field Left
Move Left One
Field Right
Move Right One
Special Function 2
Special Function 4
Special Function 6
Special Function 8
Insert\Typeover
The function key assignments on your machine are:
No more help is available.
The system called GetListIndex with element %s, but that element is not found in the currently selected list.
AlignChangedList was called with the element %s, but that element was not found in the currently selected list.
AlignListDisplay was called with the element %s, but that element was not found in the currently selected list.
File %s could not be found.
File %s could not be renamed to %s.
Change Modes
The system called PushHelpContext to push context number %d onto the stack, but the help context stack is already full.
You cannot return to a previous help context at this point because no previous help context is left on the stack.
The Help context could not be set to number %d, because only %d Help contexts are defined. Help context numbers are zero-based.
The object or property name specified may contain illegal characters, such as a control character, comma, colon, semicolon, slash, backslash, question mark, asterisk, or tilde.
The specified object already exists in the bindery.
The specified property already exists for the object.
This station does not have rights to create or change a property for the specified object.
The data file type specified was incorrect.
The data file format is the wrong version.
A read error occurred during attempt to read the data file.
Connection information could not be obtained about connection number %d.
The palette stack is full.
The palette stack is empty.
Error Report
Press a key when ready ...
The message queue is full.
There is either a lack of dynamic workspace or an I/O failure.
File pattern %s cannot be erased because some of the files in the directory are currently being used by another station.
Directory %s cannot be deleted because the directory is currently being used by another station.
The given text could not be appended to the current spool capture file.